| Product Specifications |
| System Type |
Nd Yag, 532Lite Handpiece & Dye Impregnated Polymers |
| Wavelengths |
1064nm, 532nm, 585nm, 650nm |
| System Type – Nd Yag |
Wavelength = 1064nm & 532nm; Pulse Width = 5-20 nsec; Maximum Rep Rate = 10 Hz |
|
1064nm Maximum Fluence Per Spot Size – 8.5mm = 2.1 J/cm2, 8mm = 2.3 Jcm2, 6mm 4.2 Jcm2, 4mm = 9.4 J/cm2, 3mm = 12 J/cm2, 2mm = 12 J/cm2, 1.5mm = 12 J/cm2, 1.5mm = 12 J/cm2; PTP Mode – 8.5mm = 2.7 J/cm2, 6mm = 5.5 J/cm2 |
|
532nm Maximum Fluence Per Spot Size – 6mm = 1.5 J/cm2, 4mm = 3.4J/cm2, 3mm = 5 J/cm2, 2mm = 5 J/cm2, 1.5mm = 5 J/cm2, 1.2mm = 5 J/cm2; PTP Mode – 6mm = 1.6 J/cm2 |
| System Type – 532Lite Handpiece |
Wavelength = 532nm; Pulse Width = 5-20 nsec; Maximum Rep Rate = 10 Hz |
|
532nm Maximum Fluence Per Spot Size – 3mm = 0.4 J/cm2, 2mm = .08 J/cm2, 1.5mm = 1.4 J/cm2, 1.2mm = 2.3 J/cm2 |
| System Type – Dye Impregnated Polymers |
Wavelength = 585nm & 650nm; Pulse Width = less than 7 nsec |
|
585nm Maximum Fluence per Spot Size – 2mm = 8.2 J/cm2; Maximum Rep Rate = 2 Hz |
|
650nm Maximum Fluence per Spot Size – 2 mm = 5.5 J/cm2; Maximum Rep Rate = 1 Hz |
| Aiming Beam |
Red, Variable Intensity |
| Electrical Requirements |
220 V, Single Phase, 8 Amp, 50/60Hz, 10 Amps at 220 V AC |
| Size (H x W x D) |
113 cm x 30.5 cm x 72.5 cm |
| Weight |
59.4 kg |
